Product List
Home>>FlangeSlip on flange

Slip on flange

Slip-on flanges

The slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger than the O. D. of the matching pipe. They are preferred over welding neck flanges by many users due to their lower initial cost, but final installation cost is probably not much less than that of the welding neck flange because of the additional welding involved.


A) Size: 1/2 "-60", DN15-DN4000

B) Materials:

a) Carbon steel: ASTM A105/A105M/ASME AS105, ST37.2

b) Stainless steel: ASTM A182 F304, F304L, F316, F316L

C) Standard:

ANSI/ASME B 16.5 Standard,B16.47 Series A & B,AWWA C207,BS10-1962,BS4504

Sec. 3.1/1989,EN1092-1: 2002,ISO 7005-1,JIS B2220,DIN Standard

Click here to view


Welding neck flange  
Blind flange    
Plate flange  
Socket Welding flange 
Lap Joint flange 
Treaded flange

Expansion joint



News-Standard finish for face of flanges (ANSI B16.5)

News-ANSI B16.5 Slip on 150LBS RF dimension

News-ANSI B16.5 Slip on 300LBS RF dimension





Copyright 2012 HEBEI ALLMAX I/E CO.LTD. All Rights reserved    E-mail:  
Tel: 0086-311-69008718 Fax: 0086-311-66690778 Address:No.080 A2 Street Hedao International Trade Port Baigou Town,Hebei.China